manufacturer, and the high product quality is welcomed by the majority of users, but we will also encounter some problems, big and small, during the installation process of the computer spring machine. Let us Let's take a look at the two problems that are often encountered in the installation of computer spring machines

First. The computer spring machine is out of control. It cannot be presented at will in the host computer (computer information system controller) of azimuth control, but this is because it is difficult for us as a Chinese enterprise to solve the problem effectively.

The reasons for the out-of-control management of the upper computer system are analyzed as follows:
1. There are problems in the design of the AC servo control board and related circuits;
2. The continuous processing of the tension spring fails; 3. The terminal problem of various control circuits; 4. The encoder of the servo motor and the related echo circuit or power supply problem.

Second.POR often random alarm and not reset
The reason is that the computer spring machine cannot be reset an hour before the winter half year. The machine can be clearly linked to the working temperature. You can choose private server to control the motor. The environmental requirements require no condensation, and the temperature is 0-40 degrees. If the temperature is low, the more viscous oil in the theme's interior will cause blockage. You can operate for half an hour and the whole body will heat up, and the problem will disappear. . Treat this by raising the temperature of the plant or changing the oil. Secondly, for the problem of computer password lock, please contact the manufacturer to obtain the user's password immediately.