About the operating standard of CNC universal spring machine:
① Equip the corresponding grinding sleeve according to the height request of the CNC spring machine, where the height of the grinding sleeve should be slightly lower than the height of the spring machine, about 3.0mm, and then adjust the height of the grinding wheel by handwheel operation, lock and Fixed position;
② The height of the wire plate at the exit of the conditioning spring machine should be slightly lower than the plane height of the lower grinding wheel;
③ Adjust the rotation speed of the turntable according to the thickness of the spring wire. The rotation speed of the larger diameter is slower, and vice versa;
④ When starting the spring machine for the first time, be sure to pay attention to ensure that the cover of the oil injection hole on the turntable speed servo motor is opened to prevent oil leakage caused by air contraction.
Note on the operation of CNC universal spring machine:
① Do not exceed the load of the spring machine to stop consumption, such as long-term operation, processing beyond the wire diameter range, etc .;
② Pay attention to whether the machine can run smoothly without noise or abnormal vibration, and stop regular inspection and maintenance;
③Measuring tools, instruments and fixtures must not be placed on the machine, so as to avoid the occurrence of unpredictable conditions when the machine is running;
④ Ensure that the smooth parts of the machine are smooth and free of obstructions to ensure the performance of the machine in all aspects and extend the operating time;
⑤ The machine specific control point, before starting the computer spring machine, fix the tool position and the set screws not to loosen, and ensure that the outer diameter of the spring forming is within the request; Among them, the machine specific control point is controlled by the computer program Y Feed amount to ensure that the spring length is within the requested range.