About the operation standard of CNC universal spring machine:
① According to the height requirements of the CNC spring machine
, the corresponding grinding sleeve should be equipped. The height of the grinding sleeve should be slightly lower than the height of the spring machine, about 3.0mm, and then adjust the height of the grinding wheel to operate, lock and fix the position of the hand wheel;
②The height of the outlet wire plate of the quenched and tempered spring machine should be slightly lower than the plane height of the lower grinding wheel;
③ Adjust the speed of the turntable according to the thickness of the spring wire. A larger diameter rotates slower, and vice versa;
④When starting the spring machine for the first time, be sure to ensure that the cover of the oil filling hole on the turntable speed control servo motor is open to prevent oil leakage caused by air contraction.
Precautions for operation of CNC universal spring machine:
① Do not exceed the load of the spring machine to stop consumption, such as long-term operation, processing beyond the wire diameter range, etc.;
② Pay attention to whether the machine can run smoothly, without noise and abnormal vibration, and stop regular inspection and maintenance;
③ Do not place measuring tools, instruments and fixtures on the machine to avoid unpredictable situations when the machine is running;
④ Ensure that the smooth parts of the machine are smooth and unobstructed, ensure the performance of the machine in all aspects, and prolong the running time;
⑤ For the specific control point of the machine, before starting the computer spring machine, fix the tool position and the set screw without loosening, and ensure that the outer diameter of the spring forming is within the required range; among them, the specific control point of the machine tool is controlled by the computer program Y feed , to ensure that the spring length is within the required range.