How to deal with spring forming machine errors?

Posted by Admin
The wire forming machine in the spring machine is a commonly used wire processing automation machine at this stage. The production process of the wire requires high precision, otherwise it is easy to cause product quality problems, so what should I do about the processing error of the wire? Wire forming machine? How to solve?

There are many factors that cause errors in wire forming machines. Among them, there are both human factors and practical operation problems, which are also caused by the problems of the equipment itself. Therefore, it must be checked immediately:

The first is to check whether the tool of the wire forming machine is damaged. Damage to the tool can lead to substandard machining and errors. If this situation causes an error, another tool can be removed and replaced. wrong question.

If the wire forming equipment does not find any damage during the entire inspection process, the wire must be inspected. Inferior wire rods will affect the accuracy of processing, so manufacturers must do a good job in quality control of wire rod raw materials;

If there are still necessary errors at this time, it will not be due to the problem of abrasive tools or flatness. The hydraulic transmission system and balance mechanism in the equipment cannot ensure that the working pressure oil flows into the upper and lower hydraulic cylinders in a balanced manner. Yes, you must make adjustments;

The adjustment method is to adjust the working method of the wire forming machine to "start light adjustment", then take out the abrasive tool in the equipment, or some other precautions, make the guide rail slider stay in the mechanical equipment stop and then adjust the barometer to the necessary work Pressure value. The actual method is to reduce the dial indicator head in the wire forming equipment by 3-4mm, and step on the foot to make the system software stress. When pressure or system software is vented, check the position of the dial indicator second hand. If the required tag value is reached, the actual operation can be terminated and the error condition cleared!

Surrounding it is the process of machining errors associated with wire forming machines. In addition to checking the equipment for common failure conditions, it is also necessary to pay attention to the actual operation method to prevent errors as early as possible.

Related Products