Many spring machine manufacturers have encountered the problem of computer spring machine leakage. How should we deal with it? When we encounter computer spring machine leakage, we can’t ignore it, but we don’t need to panic. The following Zhejiang Omnipotent Spring Machine Co.,ltd. teaches How do you solve it quickly and effectively:
The voltage technology of the computer spring machine is mostly below 60 volts, and the data above 60 volts are abnormal in analysis and need to be handled properly
1. Ordinary wire and machine to the home premium cut, with the power ground wire bottom thread stitching machine, an iron rod with a meter deep into the ground, the first motor is connected, if the measured voltage is 200V-220V, the sheath of the damaged wiring, then Check that when the wiring of each fan is damaged, the machine then checks whether the corner controller is damaged, if not, check and rule out.
2. If a voltage measured value is between 60V-150V, and the working power supply system may trip, then it may be connected to the spring machine. It is recommended to connect the spring machine to other ordinary life needs.