Xiaochang, a confidant who is conceited and familiar with the operation of the spring machine, the Y-axis is the wire feed axis. The spring machine system uses the Y-axis servo motor and transmission gear linkage, and transmits the signal to the system through the servo driver and encoder and other components, and then uses the computer The interface achieves interactive operation. Therefore, if the system "Y-axis servo alarm" is displayed during the operation of the spring machine, the spring machine can shut down and restart the machine to see if the system alarm message is abolished.
If the system alarm message cannot be repealed, what are the main components of the system alarm?
E.g,
① Obstruction of electrical components caused by servo motors, drives, encoders or frequency converters,
②The sluggishness caused by stuck dust or iron filings, spring machine system
CNC-625A/B Ⅲ CNC-625A/B Ⅲ 3AXIS CNC SPRING FORMING MACHINE ...
See DetailsCNC-635ⅡA/B CNC-635ⅡA/B 3AXIS CNC SPRING FORMING MACHINE...
See DetailsCNC-650ⅡA/B CNC-650ⅡA/B 3AXIS CNC SPRING FORMING MACHINE...
See DetailsCNC-625Z CNC-625Z 5AXIS CNC SPRING FORMING MACHINE E-mail: [email protected]
See DetailsCNC-635Z CNC-635Z 5AXIS CNC SPRING FORMING MACHINE E-mail: [email protected]
See DetailsCNC-650Z CNC-650Z 5AXIS CNC SPRING FORMING MACHINE E-mail: [email protected]
See DetailsTK-208A/TK-208B TYPE TK-208A/TK-208B CNC SPRING COILING MACHINE TK-208C TYPE TK-208C CNC SPRING CO......
See DetailsTK-312 TK-312 3AXIS CNC SPRING COILING MACHINE...
See DetailsTK-316 TK-316 3AXIS CNC SPRING COILING MACHINE...
See DetailsTK-320 TK-320 3AXIS CNC SPRING COILING MACHINE...
See Details