How to adjust so as not to damage the spring machine?

Posted by Admin

1. When the multi-functional computer spring machine is running, discourage touching the control panel with your hand. The fall of the bomb yellow product must be well controlled to prevent the knife holder from being stuck and the knife collision situation. When the bomb yellow product is abnormal, it must be interrupted before the adjustment and adjustment is terminated.
2. The structure of the elastic yellow consumer spring machine mainly drives the axle box, the screen on the computer, the forming area, the AC servo motor, the CNC blade, the pivot, the automatic wire feeder, the hydraulic machine area, etc. The main shaft bearing box and pitch area are driven down by the AC servo motor to drive the main shaft bearings to rotate or translate vertically.
3. Because the principle of the multifunctional computer spring machine is different from other spring machines, it is required to pay attention to the following points in actual operation: Start up must be strictly according to the application process. It is necessary to check all standard parts transferred after the machine is adjusted before consumption to prevent Looseness, fall, movement during consumption, sickness of knife, damage to spring machine.

Related Products