Do you know the details of the disassembly and assembly of the computer spring machine?

Posted by Admin
With this spring machine, all practical operations become more and more flexible, saving a lot of human capital. However, in practical applications, its parts are often difficult, and must be disassembled at this time. Due to the complex structure, it is necessary to understand the key points of dismantling each part.

1. Interfering with the connector. The spring processing machinery and equipment manufacturers introduce the disassembly of the interference parts of the computer spring machine in detail. According to the tolerance of the parts and the size of the interference, select the appropriate special tools and methods for disassembly. According to the degree of tightness, from loose to tight, use a mallet, copper rod, hand or sledgehammer, wire puller, etc. to disassemble in turn. Excessive interference or maintenance of the mating surface can make temperature-resistant parts or water-cooled parts, and then quickly press out. No matter which method of disassembly is used, it must be checked for additional fixing or positioning devices such as dowels, screws, etc. If it needs to be removed first, the force application position should be appropriate, the pressure should be uniform, and the orientation should be accurate.

2. Disassembly of the roller bearing. When disassembling the spring machine roller bearing, in addition to the disassembly and assembly points of the interference connector, it is necessary to pay attention not to transmit the force of the rotating body as much as possible. Press the soft metal material and the wooden stick onto the bearing end cap, place the spacer under the rolling bearing, and hit with a hammer.

3. Can not be disassembled. The spring processing machinery and equipment manufacturer introduced in detail that the disassembly of the weldment can be sawing, flat chisel laser cutting, drilling a row of holes and then using a small twist drill, and then chisel or saw, oxygen cutting. The removal of riveted parts can be chiseled, sawed off, oxygen-cut bolt heads or drilled with twist drills. The key to the disassembly of the computer spring machine is the disassembly of the connecting parts. In addition to following the standard, you should also master it.