News -

Home / News (Page 12)

What should I pay attention to in the operation specifications of CNC universal spring machine?
29 Nov 2019
About the operating standard of CNC universal spring machine: ① Equip the corresponding grinding sleeve according to the height request of the CNC spring machine, where the height of the grinding sleeve should be slightly lower than the height of the...
Computer spring machine external adjustment
23 Nov 2019
1. Mainly adjust the external warp mechanism. When the cylindrical spring is rolled, the top and bottom of the ejector pin are fixed or fixed to the appropriate position. It only needs to be adjusted inside or outside the ejector pin. Therefore, it i...
How to ensure the daily high speed work of the computer spring machine!
15 Nov 2019
1 When starting up, strictly follow the application steps and clarify the operation. The spring machine must stop all kinds of testing and debugging operations before leaving the factory. The user must check the fasteners to be tuned when debugging t...
What are the phenomena that cause the spring valve to malfunction? How to eliminate it?
09 Nov 2019
The failure phenomenon of the spring machine safety valve mainly has the following situations: 1. The safety valve cannot be normally switched; 2. The safety valve cannot be opened as usual; 3. The valve has air leakage, no elastic force or a tight s...
What problems are easily caused by multi-function computer spring machines in programming?
01 Nov 2019
It is also uncommon to encounter the phenomenon that device programming cannot be zeroed. The main thing is to check if the device is in a normal state. The principle of the consumer spring is mainly to apply the reaction force. The wire feeding whee...
Daily maintenance features of the rotating part of the CNC spring machine
26 Oct 2019
1. Turn off the power of the CNC spring machine and wait for five minutes for the circulating oil to flow back to the oil storage tank. Find a grease pan, place it under the lubrication pump, slowly pry the oil plug and let the oil flow into the oil ...
Torsion spring machine no-load test run
12 Oct 2019
1. First start the rotation of the torsion spring machine to check whether the components are normal. Whether the voltage is stable or not, after checking the Z-axis, check whether the Z-axis rotation is stable and there is no twisting. No load opera...
Mechanical characteristics of the torsion spring machine
30 Sep 2019
PC control, servo power, simple mechanical adjustment, many sports stations, can produce a variety of complex shape of the torsion spring upper control system using the domestic top CNC controller, high-performance dual-core CPU, Windows operating in...

Products
Tel
Email
Order
Share

Products

Products

Feedback

Please leave your Email or phone nomber, so we can contact you as soon as possible.